267 found, showing page 9 of 18
$358.99
BLK MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$347.99
BLUE MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$130.99
WOOD/FBGLS MARINE PRIMER
Specialty marine primer for use above the waterline. Use antifouling paint for boat bottom preparation. Quart size. Useon wood and fiberglass.
View Details
$140.99
CLR MARINE SPAR VARNISH
A specially formulated exterior polyurethane for wood surfaces above the waterline. UV, salt and mildew-resistant coating expands and contracts with changing weather conditions. Tough, flexible, long-lasting coating adds a warm, golden glow that enhances the wood's natural beauty.
View Details
$122.99
EXT FLT NEUTRAL BS PAINT
This paint is formulated with 100\% acrylic resins for durability and colorfast performance. This is for most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors. It is resistant to fading, peeling, and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs., and to recoat in 4 to 6 Hrs. Apply with brush, paint pad, or sprayer. Easy-to-clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. 15 year warranty.
View Details
$145.99
EXT S/G NEUTRAL BS PAINT
This paint is formulated with 100\% acrylic resins for durability and color fast performance, use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors. Is resistant to fading, peeling, and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs., and to recoat in 4 to 6 Hrs. Apply with brush, paint pad, or sprayer. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Satisfaction guaranteed.
View Details
$612.99
TRUBSC EXT S/G CLR BS 5 GAL
EXT S/G CLEAR BS PAINT
View Details
$148.104
B-I-N INT PRIMER SEALER
A flat, white primer for every interior surface, even metal or glass. Closes the pores of most surfaces and prevents bleeding stains, sappy wood from ruining paint job. Covers crayon marks, grease stains, dark wallpaper designs, etc. Made with a base of pure shellac, and dries in 45 minutes. May be applied with brush, roller, or airless sprayer.
View Details
$401.027
B-I-N INT PRIMER SEALER
A flat, white primer for every interior surface, even metal or glass. Closes the pores of most surfaces and prevents bleeding stains, sappy wood from ruining paint job. Covers crayon marks, grease stains, dark wallpaper designs, etc. Made with a base of pure shellac, and dries in 45 minutes. May be applied with brush, roller, or airless sprayer.
View Details
$125.99
GOLD HAMMERED PAINT
Now you can paint right over rust to get a distinctive hammered metal appearance with the same great rust-preventative qualities as the Stops Rust finishes. This finish hides flaws and imperfections, requires minimal surface preparation, is ideal for scratched, rusted, and pitted metal. Decorates and protects metal, wood, concrete, and stone. Application Method: Brush, Roller Or Spray Gun. Time Before Recoating: Within 4 Days Or After 7 Days. Available in 12 Oz. spray and quart. Quart covers approximately 100 Sq. Ft.
View Details
$130.636
SILVER HAMMERED PAINT
Now you can paint right over rust to get a distinctive hammered metal appearance with the same great rust-preventative qualities as the Stops Rust finishes. This finish hides flaws and imperfections, requires minimal surface preparation, is ideal for scratched, rusted, and pitted metal. Decorates and protects metal, wood, concrete, and stone. Application Method: Brush, Roller Or Spray Gun. Time Before Recoating: Within 4 Days Or After 7 Days. Available in 12 Oz. spray and quart. Quart covers approximately 100 Sq. Ft.
View Details
$82.49
S/G BLACK RUST ENAMEL
Krylon Rust Tough with Anti-Rust Technology provides premium protection from corrosion and rust on metal, chemical resistance, fade resistance and can be applied directly to metal surfaces. For increased protection and hide when making drastic color changes, use Krylon Rust Tough Primer as basecoat under paints. Best results when air and surface temperatures are between 55 F (12 C) - 75 F (24 C) and humidity is below 60\%. Applying outside this range may impact finish.
View Details
$82.49
S/G WHITE RUST ENAMEL
Krylon Rust Tough with Anti-Rust Technology provides premium protection from corrosion and rust on metal, chemical resistance, fade resistance and can be applied directly to metal surfaces. For increased protection and hide when making drastic color changes, use Krylon Rust Tough Primer as basecoat under paints. Best results when air and surface temperatures are between 55 F (12 C) - 75 F (24 C) and humidity is below 60\%. Applying outside this range may impact finish.
View Details
$82.49
SATIN BLACK RUST ENAMEL
Krylon Rust Tough with Anti-Rust Technology provides premium protection from corrosion and rust on metal, chemical resistance, fade resistance and can be applied directly to metal surfaces. For increased protection and hide when making drastic color changes, use Krylon Rust Tough Primer as basecoat under paints. Best results when air and surface temperatures are between 55 F (12 C) - 75 F (24 C) and humidity is below 60\%. Applying outside this range may impact finish.
View Details
$82.49
SATIN WHITE RUST ENAMEL
Krylon Rust Tough with Anti-Rust Technology provides premium protection from corrosion and rust on metal, chemical resistance, fade resistance and can be applied directly to metal surfaces. For increased protection and hide when making drastic color changes, use Krylon Rust Tough Primer as basecoat under paints. Best results when air and surface temperatures are between 55 F (12 C) - 75 F (24 C) and humidity is below 60\%. Applying outside this range may impact finish.
View Details
